|
Uniseal Frequently Asked Questions
Questions and Answers about Uniseals.
If you have a question about Uniseals and their use contact me HERE I will add it into the Uniseal FAQ's. I am also interested to hear of how our customers have used Uniseals and could add some photos to the site.
Question |
I found a hole saw set on eBay that came from China will that be any good to make my holes for my Uniseals? |
| Answer |
An inexpensive hole saw should be OK to create your holes in plastic or plywood. Creating a decent hole in aluminium or mild steel would probably be impossible. The main criteria in creating your hole is that it is a good clean hole with no swarf. A really cheap hole saw may do the job just fine as long as the teeth on the holesaw remain sharp. On a cost per hole basis this would really keep the price down. There is every likelihood that you will not be able to cut dozens of holes though. Please remember when using a holesaw not to run the saw too quickly, the slower the better.
|
|
|
|
|
|
|
|
|
See all FAQS
|
